ROSIN MODIFIED PHENOLIC RESIN


POLYTONE P SERIES ROSIN MODIFIED PENTA ESTERIFIED PHENOLIC RESIN

POLYTONE® P Series range of resins are Ink Resins and Vehicles. They also find use in coatings applications

The various grades in the P Series have been developed to offer solutions for a various ink applications like Offset, Webset, Sheetfed, Coldfed, Heatset etc. Act as vehicles and facilitate high speed printing in modern machines.

The products are further customizable and variation in the properties if needed can be done.

POLYTONE® P Series
LOW VISC./LOW MELTING POLYTONE® P 140
POLYTONE® P 141
MED VISC./MED MELTING POLYTONE® P 143
POLYTONE® P 144
HIGH STRUCTURE POLYTONE® P 145
POLYTONE® P 146
PETROLEUM DISTILLATE SOLUBLE POLYTONE® P 142

POLYTONE P 140/141/142/143/144/145/146 Resins are phenolic modified rosin esters with a range of molecular weights which offers complete viscosity range (low to high). These resins have reactivity to gelling agents and excellent solubility in mineral oils.

These resins promotes fast adhesion and anchorage to substrate and offer gloss. Its ideal for offset inks in heat set and quick set and as modifying resin in flushing. High Melting resins are designed for modern high speed printing equipment.

Its good gel stability makes its an excellent choice to obtain high structure and fast setting in sheet fed inks and provides excellent gloss.

MPE Series Modified Gum Rosin Ester
LIGHT COLOR/HIGH TACK POLYTONE® RE 45
POLYTONE® RE 45

POLYTONE® RE 45 & RE 46 are low odor modified gum rosin esters. They have very good tackifying properties which can be used in the formulation of different kind of adhesives with light color, stability and oxidation resistance.

POLYTONE® P 140/141/142/143/144/145/146
Type Chemistry
Phenolic Resin Rosin Modified
Rosin Modified Phenolic Resin Penta Esterfied
Phenolic Modifed Rosin Ester Modified Phenolic
MODIFIED PHENOLIC RESIN / LOW MELTING / LOW VISCOSITY/ ROSIN MODFIED PENTA ESTERIFIED RESIN
POLYTONE® P 140 POLYTONE® P 141
Colour Yellowish-Brown Yellowish-Brown
Melting Point (Capillary) 110 – 120 °C 135 – 145 °C
Viscosity of 50% solution in Toluene at 30º C by B 4 Ford Cup 18 – 22 sec 28 – 36 sec
Acid Value 20 mg KOH/ g resin (Max) 20 mg KOH/ g resin (Max)
MTO Tolerance of 50% solution in Toluene 1:10 Min 1:10 Min
Characteristics Low Viscosity Water Resistant Colour Retention
Application/ Industry Offset Printing Inks, Flexographic Inks, Gravure Inks, Printing Inks, Varnishes

*Test method available on request

MODIFIED PHENOLIC RESIN / MEDIUM MELTING / MEDIUM VISCOSITY/ ROSIN MODFIED PENTA ESTERIFIED RESIN
POLYTONE® P 143 POLYTONE® P 144
Colour Yellowish-Brown Yellowish-Brown
Melting Point (Capillary) 145 – 155 °C 145 – 160 °C
Viscosity of solution in Toluene at 30º C by B 4 Ford Cup 70 – 90 sec [50% solution] 19 – 24 sec [30% solution]
Acid Value 30 mg KOH/ g resin (Max) 30 mg KOH/ g resin (Max)
MTO Tolerance of 50% solution in Toluene 1:15 Min 1:15 Min
Characteristics Water Resistant Colour Retention
Application/ Industry Resin suitable for manufacture of high gloss quickset sheet fed and web offset inks, Offset Printing Inks, Flexographic Inks, Gravure Inks, Printing Inks, Varnishes

*Test method available on request

MODIFIED PHENOLIC RESIN / HIGH MELTING / HIGH VISCOSITY/ ROSIN MODFIED PENTA ESTERIFIED RESIN
POLYTONE® P 145 POLYTONE® P 146
Colour (50% Solution in Toluene) 12 MAX [Gardner Scale] 12 MAX [Gardner Scale]
Melting Point (Capillary) 140 – 165 °C 130 – 160 °C
Viscosity of solution in Toluene at 30º C by B 4 Ford Cup 50 – 70 sec [50% solution] 170 – 190 sec [50% solution]
Acid Value 25 mg KOH/ g resin (Max) 25 mg KOH/ g resin (Max)
MTO Tolerance of 50% solution in Toluene 1:15 Min
Methanol No. 25 – 35
Solubility in MTO 30 – 40
Heptane Value 20±1 ml
Characteristics  High Structure Quick Drying
Application/ Industry POLYTONE® P 146 is ideally suited for heat set inks because of its solubility in aliphatic hydrocarbon solvents.

*Test method available on request

MODIFIED PHENOLIC RESIN / HIGH INK OIL/PETROLEUM DISTILLATE SOLUBILITY/ROSIN MODFIED PENTA ESTERIFIED RESIN
POLYTONE® P 142
Colour (50% Solution in Toluene) 12 (MAX) Gardner Scale
Melting Point (Capillary) 130° C – 150 ° C
Viscosity of 33% solution in ARLO at 30º C by Brookfield Viscometer 4000 cP – 10000 cP
Viscosity of 50% solution in Toluene at 30º C by B4-Ford Cup 55-75 Sec
Heptane Value 30±1 ml
Acid Value 25 mg KOH/ g resin (Max)
MTO Tolerance of 50% solution in Toluene 1:10 Min
Ink Oil (280/310) Solubility of 5g – 33% solution in ARLO at 30º C 5g : 12±3 ml

*Test method available on request

CHARACTERISTICS – EFFECT ON FORMULATION & END PRODUCT
SOLUBILITY
POLYTONE® P 140/41/42/43/44/ 45/46
Mineral Oil
Vegetable Oil
Aromatic Solvents Toluene Xylene
Aliphatic Solvent Gas-Naptha Gas Solvent
Alcohol
Esters
Varnish Oil
Water
● Soluble
Limited Solubility
Insoluble
COMPATIBILITY
POLYTONE® P 140/41/42/43/44/ 45/46
Vegetable Oil
Tall Oil Alkyd Resin
Hydrocarbonaceos Resin
Rosin Based Resins
● Fully Compatible
Limited Compatibility
Not Compatible
APPLICATIONS

◆ Inks: Sheet Fed, Heat Set, Quick Set, Webfed (Heatset and Coldfed), Offset, Letterpress, Aromatic Free Inks, Inks based in Vegetable Oil, Waterless Inks
◆ Varnishes : Wetting varnishes, flushes, Overprint Varnishes (OPV)
◆ Coatings/Enamels: Oil Soluble Formulations,

POLYTONE® MPE 45/46
Type Chemistry
Gum Rosin Ester Rosin Modified
Penta Esterfied Penta Esterfied

POLYTONE® RE 45 & RE 46 are low odor modified gum rosin esters. They have very good tackifying

properties which can be used in the formulation of different kind of adhesives with light color, stability and oxidation resistance.

This finds application in Printing Inks, Hot Melt Adhesives, Packaging Adhesives, Bookbinding Adhesives, Adhesives for Thermoplastic Films, Road Marking Paints

MODIFIED GUM ROSIN ESTER
POLYTONE® RE 45 POLYTONE® RE 46
Chemical Classification Modified Gum Rosin Ester Modified Gum Rosin Ester
Physical Form Broken Lumps Broken Lumps
Color (Gardner) (60% Soln in Toluene) 3 – 7 3 – 7
Softening Point (B&R)  98 – 108 °C 108 – 118 °C
MTO Tolerance of 50% solution in Toluene 1:10 Min 1:10 Min
Characteristics High Tack
Light Color
Oxidation Reistance
Application/ Industry Printing Inks, Hot Melt Adhesives, Packaging Adhesives, Bookbinding Adhesives, Adhesives for Thermoplastic Films, Road Marking Paints

*Test method available on request

CHARACTERISTICS – EFFECT ON FORMULATION & END PRODUCT
SOLUBILITY
POLYTONE® MPE 45/46
Aromatic Solvents Toluene Xylene
Aliphatic Solvent
Alcohol
Esters
Chlorinated Solvents
Mineral Oil
Napthenic Oils
Water
● Soluble
Limited Solubility
Insoluble
COMPATIBILITY
POLYTONE® MPE 45/46
EVA
SIS
SBS
NR
CR
SBR
● Fully Compatible
Limited Compatibility
Not Compatible
STORAGE & HANDELING

Available in 25Kg HDPE Line KRAFT Paper Bags with Anti Static Liner or 25Kg HDPE Bags Choice of ISPM 15 Standard Heat Treated/Fumigated Pallets or Plastic Pallets. 500Kg/1000Kg Jumbo Bags available as an option Can be stored up to 12 months at temperatures below 35 °C.

Ketonic Resin has a natural property of yellowing over time with no deterioration in property.
SAFETY

Please follow advice and information provided in MSDS. Protective clothing & workplace hygiene measure must be observed at all times.

Detailed MSDS available on request.